Firstly, create the stops. In the menu, go to Settings>Stops
Either add a new stop manually or use the import feature.
IMPORTING
* You will still need to manually edit stops after an import, as some data is not able to be imported from the .csv
Use the above template for your .csv file.
The address field should be formatted as Latitude, Longitude (so that the location details are filled in automatically once imported).
Geofence is generally set to 75 (radius of the point on the map).
noteStop is not required (just for additional notes).
MANUALLY ADDING/EDITING
When adding a stop, make sure to select the correct Home Campus and Zone. The AM and PM checkboxes are only there to help with building a route; used to filter stops based on AM/PM in the list of stops.
BUILDING THE ROUTE
Ensure all relevant details are correct.
Capacity and Estimated Transit Time are required.
Group Off is generally only for morning routes, as it allows the driver to tag everyone off at one stop.
Continuous Scanning should be the default option.
Drag the stops from the right panel into the left, ordered appropriately. The options that appear in the right panel will be based on whether the route is AM or PM.